3 Maintenance Tips That Can Repair Your Washing Machine

Is your washing machine operating poorly? If so, then you may want to consider maintaining it on your own before assuming you need to have it replaced. There are many easy and effective maintenance services that you can do on your washer, which can enhance and improve the performance. So, before you assume your washer needs to be replaced, be sure to take the time to:

Check and Tighten The Water Hose:

Located on the rear of your washing machine is a rubber hose, which is attached from your water line and into your washing machine. If the hose isn't properly mounted or loose then you can experience a sufficient amount of water pressure in your wash cycles, which can reduce the overall performance of your machine. Tighten the hose with a clamp will help likely help resolve any pressure issue, which will enhance the performance of your machine and help it work like new again.

Clean out The Soap Dispenser:

If you are using powder soap detergent then you can likely experience clumps in your soap dispenser. This can prevent soap from entering into your machine when running a cycle, which can impact the quality of the clean you receive. There is a good chance that your soap dispenser can easily be removed by pulling it off its tray. Once you have removed it, give it a good spray down with either your garden hose or your kitchen sink. This will clear any clumps from the tray, which will allow your wash cycles to once again receive the proper amount of soap.

Replace the Drive Belt:

If your washing machine drum isn't spinning then this can likely be caused by a loose or damaged drive belt. Your drive belt is what allows your drum to spin, which means if the belt is damaged then this can be the cause to your washer not working. You will want to be sure that you buy a replacement belt design specifically for the make and model washer that you have before removing any components. Once you have the correct belt, you can easily remove the back panel of your machine, remove the old belt and install the new one. This will likely resolve your issues, so you can continue to wash your clothes without having to worry about the cost of a new washing machine.

With these appliance repair services, you will likely be able to resolve your issues that you had with your washing machine. This will prevent you from having to deal with costly replacements or the hassle of having a replacement washing machine delivered to your home. So, before you assume your machine needs to be replaced, definitely take the time to try out these tips, as you may find them to be very helpful.


Share